DVDO Quick6r User's Guide download pdf (Page 25)

DVDO Quick

25 A.04

mode

enables full surround sound even through the S/PDIF channel on Quick

1. Note that if bitstream is chosen on a source and the AVR is then

switched off, even though Quick

will unmute the audio stream to the

main display, the main display may not be capable of decoding a

bitstream audio channel and no audio will be heard. Either change the

source audio mode back to PCM/LPCM or turn on the AVR and select

the appropriate input on the AVR.

Quick

is not auto-

switching properly

Check the auto-switch settings in the Quick

menu. Manual disables autoswitch.

InstaPrevue

windows are missing

Only active inputs are displayed in the InstaPrevue screen. Any sources that are

powered down or in standby will not appear. If HDMI 6 power is used or an input

uses a non-standard power save mode, a grey window may appear for that input.

Firmware will not

update from the

USB flash drive

• Be sure both firmware files .OSD and .BIN are in the root directory of the USB

flash drive and there are no other firmware files there.

• Be sure both files are for the same firmware version (same number)

• Be sure all capital letters are used in the filenames including the extension –

format will be Q6FWxxxx.BIN and Q6FWxxxx.OSD where xxxx is a 4 digit

number common to both filenames

• When writing the files to the USB flash drive, choose Eject from the right click

menu to insure properly closed and written files before removing drive from a

computer

• When updating with the firmware Update button, unplug all HDMI connections

from Quick6. Remove power from Quick

. Hold firmware update button and

apply power.,

Factory Default

issues:

Follow reset procedure exactly:

1 2 ... 20 21 22 23 24 25 26 27 28 29 30 ... 33 34

No comments

DVDO Quick6r User's Guide Page 25