DVDO Quick6r User's Guide download pdf (Page 16)

DVDO Quick

6x2 4K Ultra HD HDMI Switcher

Quick

has a special control mechanism allowing you to easily switch ARC on and off. To use ARC with a

Quick

system:

1. Ensure that your TV is capable of ARC and that the correct TV HDMI input (usually marked ) is

connected to the Quick

MAIN HDMI output.

2. Put the TV into the ARC-on mode and enable CEC (manufacturers label these two menu items

differently; refer to the TV’s user documentation for more information).

3. Connect an audio receiver from either the coax or optical Quick

S/PDIF output to the S/PDIF input of

the receiver.

4. Switch the receiver to the S/PDIF input source.

5. Press the ARC button on the Quick

remote control or select Send Initiate ARC on the Quick

Onscreen Advanced Settings menu.

You can enable or disable ARC with the Onscreen Display. The ARC button on the remote control toggles

between enabling and disabling ARC mode.

Normally, leave the TV with ARC on and CEC enabled. When you want to use ARC, switch the audio

receiver to the S/PDIF input and press the ARC button on the Quick

remote.

1 2 ... 11 12 13 14 15 16 17 18 19 20 21 ... 50 51

No comments

DVDO Quick6r User's Guide Page 16